Anodizing Oxidize Equipment
video

Anodizing Oxidize Equipment

3C electronic products (phone and laptop housings), automotive wheels, and aerospace structural parts. These aluminum-magnesium alloy components need surface oxidation treatment.
Send Inquiry
Product Introduction

Fully Automatic Anodizing Equipment (JYC-AO-Series)

Built for Anodizing Aluminum-Magnesium Alloys

 

3C electronic products (phone and laptop housings), automotive wheels, and aerospace structural parts. These aluminum-magnesium alloy components need surface oxidation treatment. Our Fully Automatic Anodizing Equipment is designed for them. We can do sulfuric acid anodizing (Type II), hard anodizing (Type III), as well as oxalic or chromic acid anodizing. Oxide film thickness: standard type 5 to 25 microns, hard type 25 to 100 microns. After sealing, salt spray resistance exceeds 336 hours per ASTM B117. This fully meets MIL-A-8625F and ISO 10074. We serve major OEMs like Apple, Dell, HP, Huawei, Asus, Sony, and Lenovo in anodizing. Our lines are certified by Apple and Huawei.

IMG20160705110251

 

Materials and Construction for Precision Control

product-1000-662

The entire line uses SUS304 frames and PP tanks. The hoist system uses German SEW servo motors and Pepperl+Fuchs WCS positioning systems. Repeat positioning precision is ±1 mm. Key anodizing tanks use chillers with titanium heat exchangers for joint temperature control. Standard anodizing is controlled at 18 to 22°C with ±1°C precision. Hard anodizing is controlled at -5 to 5°C with ±0.5°C precision. Cathode movement or pulse rectification improves film thickness uniformity. The lines are operating stably at Foxconn and Kersen Technology.

Three Core Advantages

First, film thickness is uniform.

Dual cathodes and auxiliary cathode designs with computer-simulated electric field distribution are used. On complex parts with deep holes and grooves, film thickness deviation is controlled within ±10%.

 

Second, temperature control is precise.

Hard anodizing tanks use ethylene glycol water circulation cooling systems and titanium tube evaporators. Cooling rate is 2°C per minute. This ensures the bath does not overheat at high current densities. No powdering or burning occurs.

 

Third, the system is fully automatic PLC plus MES integrated.

Siemens PLC automatically executes the entire sequence: degreasing, alkaline etching, neutralization, anodizing, coloring, and sealing. All current, voltage, temperature, and time data are uploaded in real time. Every rack is traceable.

 

 

What Buyers Often Ask

 

Buyers ask us: "3C or automotive aluminum parts customers have very high quality and consistency requirements. What level can you achieve?" Maximum workpiece size is 2000×800×500 mm. Single rack load is 100 to 300 kg. The power supply is high-frequency pulse rectifier. Waveforms include forward, reverse, and pulse. Current density for standard type is 1 to 5 A/dm². For hard type it is 2 to 8 A/dm². Sealing options are hot pure water sealing (96 to 98°C) or cold sealing (nickel fluoride system).

 

Technical Specifications

Parameter

Specification

Standard Anodizing Film Thickness

5 – 25 µm

Hard Anodizing Film Thickness

25 – 100 µm

Salt Spray Test (after sealing)

≥ 336 h (ASTM B117)

Positioning Precision

±1 mm

Standard Anodizing Temperature

18 – 22°C (precision ±1°C)

Hard Anodizing Temperature

-5 – 5°C (precision ±0.5°C)

Film Thickness Deviation

≤ ±10%

Maximum Workpiece Size

2000×800×500 mm

Single Rack Load

100 – 300 kg

Current Density (standard)

1 – 5 A/dm²

Current Density (hard)

2 – 8 A/dm²

Applicable Standards

MIL-A-8625F, ISO 10074

 

Hot Tags: anodizing oxidize equipment, China anodizing oxidize equipment manufacturers, suppliers, factory, anodizing equipment, Anodizing Oxidize Equipment, Automatic Anodizing Oxidize Equipment Ano 4 o , Hard Anodizing Equipment, Micro arc Oxidation Equipment, T processing Equipment

Send Inquiry

Home

Phone

E-mail

Inquiry