Primary and Secondary Copper Plating Equipment
Circular Plating Equipment (JYC-Circular-Series)
Built for Maximum Production Efficiency
If your customers need single-variety, high-volume, standardized products like connectors, terminals, and small hardware, circular plating equipment is the best choice. The structure is a circular closed-loop design. Process tanks are arranged along the circumference. Racks are precisely positioned and automatically lifted by a programmable indexing turntable. Cycle time is adjustable from 15 to 60 seconds per rack. Single-line annual capacity exceeds 50 million pieces (based on small connectors). Floor space is only 50% to 60% of traditional linear gantry lines. This is especially good for customers with limited workshop space. We have served high-volume manufacturers like Fuliwang, Goertek, and Kersen Technology.

Materials and Construction for Precision

The frame uses precision-welded SUS304. The turntable drive system uses Mitsubishi, Yaskawa, or SEW servo motors with RV high-precision reducers. Positioning precision is ±0.5 mm. The conductive system uses slip rings and carbon brushes. Contact resistance is stable. Tanks are made of PP, PVC, or SUS316L based on the solution properties. We include exhaust systems to collect gases from plating tanks.
Three Core Advantages
First, production efficiency is extremely high.
All racks move simultaneously. One cycle completes one process step. There is no idle waiting time. Compared to traditional linear lines, output per unit time increases by 30% to 50%.
Second, process consistency is excellent.
Every part gets identical immersion time and current density in each tank. There is no batch-to-batch variation caused bycrane paths in linear lines. Process capability index CPK reaches 1.33 or above.
Third, energy consumption is low.
The circular structure has low heat loss. Multiple tanks share insulation layers. Electric heating energy consumption is 20% to 30% lower than decentralized designs.
What Buyers Often Ask
Buyers ask us: "What do high-volume production customers care about most?" Efficiency and consistency. This equipment supports manual, semi-automatic, and fully automatic control modes. We offer optional automatic loading/unloading robots. Vibratory racks are available to remove air bubbles from small parts. We also include online inspection stations. For maintenance, individual tanks are designed as removable, replaceable modules. This makes maintenance convenient. We provide a complete series from 12 to 60 stations. The equipment meets ISO 9001 and CE certification requirements.
Technical Specifications
|
Parameter |
Specification |
|
Cycle Time |
15 – 60 s/rack |
|
Single-Line Annual Capacity |
≥ 50 million pieces (small connectors) |
|
Floor Space |
50% – 60% of traditional linear line |
|
Positioning Precision |
±0.5 mm |
|
Number of Stations |
12 – 60 stations (optional) |
|
Output Increase |
30% – 50% over traditional line |
|
CPK |
≥ 1.33 |
|
Energy Savings |
20% – 30% |
|
Applicable Standards |
ISO 9001, CE |
Hot Tags: primary and secondary copper plating equipment, China primary and secondary copper plating equipment manufacturers, suppliers, factory, Brush Plating Equipment, electroplating equipment, Primary and Secondary Copper Plating Equipment, Roll to Roll Plating Equipment, Spot Plating Equipment
Previous
No InformationYou Might Also Like
Send Inquiry











