
Al-Mg Passivation Equipment
Conversion Coating Equipment (JYC-CC-Series)
Built for Chrome-Free Conversion Coatings on Aluminum-Magnesium Alloys
Phone mid-frames, laptop housings, and automotive aluminum wheels. These aluminum-magnesium alloy parts need chemical conversion coatings before painting. This is also called film treatment or conversion treatment. Our Conversion Coating Equipment uses chrome-free zirconium-titanium or trivalent chromium systems. Coating weight is 0.2 to 0.8 g/m². The color is colorless or light yellow. Film adhesion passes ASTM B571 testing. With supporting facilities powder coating, salt spray testing per ASTM B117 reaches 1000 hours. This meets RoHS, REACH, and ELV directives. We serve Apple and Huawei certified companies in anodizing. Our chrome-free conversion process is mature and reliable.

Materials and Construction for Process Control
Tanks use PP or SUS304. The conversion tank temperature ranges from room temperature to 50°C depending on chemical requirements. Titanium heating tubes and cooling coils are provided. Spray plus immersion processes are used. Circulation filtration has 10-micron precision. This keeps the solution clean. The entire line is PLC controlled for processing time, temperature, and pH (3.5 to 5.5 adjustable). Optional online conductivity monitoring is available. This automatically doses conversion solution.
Three Core Advantages
First, the paint base performs well.
The conversion film has a nano-needle structure. It significantly improves mechanical interlocking of powder or paint. Cross-cut testing achieves rating 0. Boiling water immersion for 2 hours causes no blistering.
Second, the process window is wide.
Processing time is adjustable from 30 seconds to 5 minutes. Slight over-processing is tolerated. It does not easily produce smut. Yield is 5% to 10% higher than traditional chromating.
Third, wastewater treatment costs are low.
The chrome-free system contains no hexavalent chromium. Wastewater only needs pH adjustment and zirconium ion precipitation to meet discharge standards. Treatment costs are reduced by 60%.
What Buyers Often Ask
Buyers ask us: "Aluminum anodizing customers increasingly demand chrome-free processes. Can you do it?" Yes. We meet MIL-DTL-81706B and ISO 15116. We integrate automatic loading/unloading and hot-air drying sections. We optimize the conversion process based on the customer's paint or powder brand. We provide bath analysis and technical training services. We have served companies in the Apple and Huawei supply chains.
Technical Specifications
|
Parameter |
Specification |
|
Coating Weight |
0.2 – 0.8 g/m² |
|
Processing Time |
30 s – 5 min (adjustable) |
|
Processing Temperature |
Room temperature – 50°C |
|
pH Range |
3.5 – 5.5 (automatic control) |
|
Filtration Precision |
10 µm |
|
Salt Spray Test (with coating) |
≥ 1000 h (ASTM B117) |
|
Yield Improvement |
5% – 10% over traditional chromating |
|
Wastewater Treatment Cost Reduction |
60% |
|
Applicable Standards |
RoHS, REACH, ELV, MIL-DTL-81706B, ISO 15116 |
Hot Tags: al-mg passivation equipment, China al-mg passivation equipment manufacturers, suppliers, factory, Al Mg Passivation Equipment, El Ni Pd Au Equipment, Electroless Nickel Gold Plating Equipment, Electropolishing Equipment, Phosphating Equipment, Stannatech Equipment
You Might Also Like
Send Inquiry










