Barrel Plating Equipment
Imitation Gold Plating Equipment (JYC-IG-Series)
Built for Gold Appearance at Low Cost
Fashion accessories, eyeglass frames, bathroom hardware, gift packaging, and furniture handles. These products need a gold decorative effect. But real gold is too expensive. Our Imitation Gold Plating Equipment solves this problem. Cost is only one-tenth to one-twentieth of real gold plating. We use a copper-zinc-tin ternary alloy system. Different gold colors are achieved by adjusting the alloy ratio. Copper makes up 80% to 90%, zinc 10% to 15%, and tin 1% to 5%. Colors range from light gold to deep gold. This is equivalent to 14K to 24K effects. Coating hardness is 200 to 300 HV. This is more wear-resistant than real gold. It meets ISO 1038 decorative alloy coating standards. We serve Apple, Huawei, and other certified companies in anodizing. The same surface treatment experience applies to imitation gold.

Materials and Construction for Color Control

We use PP tanks with temperature control precision of ±1°C. Circulation filtration precision is 10 microns. A key feature is the interface for colorimeters or spectrophotometers. This controls color difference ΔE below 1.5 in batch production. To improve corrosion resistance, we typically plate 5 to 10 microns of bright nickel underlayer. Then we plate 0.5 to 2 microns of imitation gold. Finally, we apply an electrophoretic coating or clear protective layer..
Three Core Advantages
First, tarnish resistance is very strong.
Imitation gold layers oxidize and darken easily. We integrate passivation sealing and UV-curable organic coatings. Neutral salt spray tests improve from 8 hours to over 96 hours. Export to Europe and America is no problem.
Second, color is very uniform.
Pulse current or stepped stepped current processes are used. There is no yin and yang or color difference between high and low current density areas. Color is highly consistent from top to bottom of the rack.
Third, maintenance costs are low.
Continuous filtration and activated carbon treatment effectively remove organic decomposition products. Bath life extends to 2 to 3 years. Tank replacement costs are greatly reduced.
What Buyers Often Ask
Buyers ask us: "Decorative parts customers demand very high color consistency. Can you do it?" Yes. Fully automatic gantry or single-arm production lines are available. We integrate ultrasonic cleaning pre-treatment sections. This ensures brightness on complex shaped parts. For high-end products combining imitation gold and real gold, we can do differential masking plating. Some areas get real gold, others get imitation gold on the same part. We guarantee our imitation gold formula contains no cadmium. It fully meets RoHS and California Proposition 65 requirements.
Technical Specifications
|
Parameter |
Specification |
|
Alloy Composition |
Cu 80-90%, Zn 10-15%, Sn 1-5% |
|
Coating Hardness |
200 – 300 HV |
|
Coating Thickness |
0.5 – 2 µm (imitation gold layer) |
|
Nickel Underlayer Thickness |
5 – 10 µm |
|
Color Difference Control |
ΔE < 1.5 |
|
Salt Spray Test |
≥ 96 h (with sealing layer) |
|
Bath Life |
2 – 3 years |
|
Applicable Standards |
ISO 1038, RoHS, California Proposition 65 |
Hot Tags: barrel plating equipment, China barrel plating equipment manufacturers, suppliers, factory, Acid Zinc Barrel Plating Machine, Alkaline Zinc Plating Equipment, Barrel Plating Equipment, Copper Nickel Chrome Plating Equipment, Industrial Pure Water Equipment, Nickel Gold Plating Equipment
You Might Also Like
Send Inquiry











