Imitation Gold Plating Equipment

Imitation Gold Plating Equipment

High-power electronic components, switch contacts, busbars, and RF connectors. These products need the best electrical conductivity. Our Silver Plating Equipment is designed for them.
Send Inquiry
Product Introduction

Silver Plating Equipment (JYC-Ag-Series)

Built for the Most Conductive Coating

 

High-power electronic components, switch contacts, busbars, and RF connectors. These products need the best electrical conductivity. Our Silver Plating Equipment is designed for them. Silver has a resistivity of only 1.59 micro-ohm-centimeters. This is the lowest of all metals. Solderability is also excellent. Coating thickness is typically 2 to 10 microns. For wear resistance, we can go to 10 to 25 microns. Hardness is adjusted to 80 to 120 HV with additives. This meets ASTM B700 and MIL-DTL-45204D. Our acid zinc-nickel caliper line passed Beijing Benz and BMW certification.The same process control capability is used on this silver plating equipment.

c6e39def034dbba3023e687844d3bff

 

Materials and Construction to Prevent Tarnishing

 

Silver tarnishes easily. Tanks use SUS304 lined with plastic or PP materials. Dual-stage filtration has 5-micron precision. This prevents particles from causing rough coatings. A key innovation is the integrated anti-tarnish post-treatment section. This includes electrolytic passivation or chemical protective layers. Silver's sulfide resistance is improved by over 5 times. In a 2% potassium sulfide solution test, no discoloration for 5 minutes is considered passing.

 

Three Core Advantages

First, throwing power is excellent.

Cyanide or non-cyanide complexing agent systems are used. Combined with vibration plating or strong agitation, deep holes and blind holes get complete silver coverage.

 

Second, hardness is adjustable.

By adding brighteners or hardeners, silver hardness increases from pure silver's 30 HV to 120 to 150 HV. Wear resistance improves 3 to 4 times. This is suitable for sliding contacts.

 

Third, self-lubricating coatings are available.

We offer solid lubricant co-deposition as an option. Graphite or PTFE particles are embedded in the silver layer. This forms a self-lubricating composite coating. Friction coefficient drops to 0.08.

 

 

What Buyers Often Ask

 

Buyers ask us: "What do high-voltage switch or high-current connector customers care about most?" Conductivity and wear resistance. This equipment supports rack, barrel, and continuous strip plating configurations. It comes with ampere-hour meters that automatically dose silver salt and additives. If customers need silver layers that do not tarnish in marine or high-temperature high-humidity environments, we can integrate nano-coating sealing stations. For oversized parts like high-voltage switch contacts, we design mobile plating tanks or on-site brush plating solutions. We have 12 patents. Our technical capability is strong.

 

Technical Specifications

Parameter

Specification

Silver Resistivity

1.59 µΩ·cm

Coating Thickness

2 – 10 µm (standard) / 10 – 25 µm (wear-resistant)

Coating Hardness

80 – 120 HV (adjustable to 150 HV)

Sulfide Resistance Improvement

> 5×

Potassium Sulfide Test

≥ 5 min (no discoloration)

Friction Coefficient (self-lubricating)

≤ 0.08

Contact Resistance

As low as 1 – 5 mΩ

Applicable Standards

ASTM B700, MIL-DTL-45204D

 

Hot Tags: imitation gold plating equipment, China imitation gold plating equipment manufacturers, suppliers, factory, Acid Zinc Plating Equipment, Alkaline Zinc Barrel Plating Equipment, Chamber Silver Plating Equipment, Copper Nickel Chrome Plating Equipment, Industrial Pure Water Equipment, Silver Plating Equipment

Send Inquiry

Home

Phone

E-mail

Inquiry